Category: What’s New?

Hello,

Stay up to date with the latest features and enhancements we’ve just launched on the Dynamox Platform.

Check out what’s new and leverage these updates to their fullest! 

____________________________________

Rescheduling spectral acquisition on an idle machine 

Ensure that only relevant data is collected, analyzed, and stored by aligning spectral capture with the asset’s operating status. 

This feature allows the system to automatically reschedule spectral collections when it detects — based on the operating thresholds configured on the Spot — that the machine is stopped. 

With rescheduling: 

Without rescheduling: 

In SpotViewer, you can clearly observe the effects of rescheduling by comparing the event timeline 
with the telemetry graphs: 

With rescheduling enabled: 

During periods when the global RMS velocity approaches 0 mm/s (indicating the machine is stopped), no spectral collection records are generated. These collections are rescheduled and performed only when the asset resumes operation. 

Without rescheduling enabled: 

The collection follows the gateway’s fixed schedule, generating spectral events even during downtime; cluttering the timeline with irrelevant events. 

In SpectralViewer, the impact is seen in the quality and relevance of the available spectral graphs: 
With rescheduling enabled: 


The spectral graphs reflect moments when the asset was actually operating, making the analysis more accurate and useful for diagnostics and decision‑making. 


Without rescheduling enabled: 
A large volume of graphs is generated during inactive periods, which are not useful for analysis since they do not represent the asset’s real behavior. 


CONFIGURATION 
Rescheduling is configured through the collection schedule of the DynaGateway LTE or IoT, running firmware version 2.1.1. This option is not available in earlier versions. 


ATTENTION: When the configuration is set to triaxial, for operational‑level thresholds, any axis that exceeds the defined limit will be considered as the machine operating. In other words, the logical operator used is “OR”. If X, Y, or Z are above the threshold, the function will not be enabled, and a collection will be performed. 
In the DynaGateway Viewer screen, when you click the COLLECTION SCHEDULE button, the option appears disabled by defaultand must be selected to enable it. 

If the Spot does not have operational levels configured, attempting to enable rescheduling will trigger a message informing you that this configuration is required, along with a button that takes you directly to the operational levels screen. 

After configuring and saving the levels, the schedule can be adjusted normally. Then, you must: 

1. Save the schedule. 

2. Save the DynaGateway. 

3. Confirm the update. 

After that, the icon for spectral‑collection rescheduling on idle machines will appear in the collection settings column. 

The collections will be rescheduled according to the following sequence: 

• Schedule 1 = 15 minutes, new attempt. 

• Schedule 2 = 30 minutes, new attempt. 

• Schedule 3 = 45 minutes, new attempt. 

• Schedule 4 = 1 hour 15 minutes, new attempt. 

In other words: A(N–1) + A(N–2) = AN. 

The collections that do not take place will be displayed in the panel on the right side of the screen, after clicking the “EVENTS” button. 

These improvements were designed to make your monitoring experience more intuitive and efficient, contributing to a smoother and clearer operation in your daily routine. 

Do you have any questions or want to know more about any of these new features? Get in touch with our team! 

See you next time! 

 
The Dynamox Team 

_____________

Defect Detection 

Responding to requests from our clients, we’ve introduced three updates to DynaDetect, Machine Viewer, and Spot Viewer that make defect monitoring even more efficient and intuitive. 

DynaDetect  
Asset indicators are back on the DynaDetect home screen. When accessing DynaDetect, you’ll now see a clear and quick overview of monitored assets, assets with critical defects, assets with manageable defects, and assets without diagnostics. You can also use the “Show Indicators” and “Hide Indicators” options to customize the display of information as you prefer. 

Machine Viewer 
The second update is that Machine Viewer now displays subassembly and component information directly on the screen. Clicking on these elements reveals details in the new layout, along with a quick-access button to DynaDetect for monitoring other equipment. This brings more efficiency to your asset management. 

Spot Viewer 
In Spot Viewer, defects are now shown by severity directly on the screen. When selecting a defect, the new quick analysis tab displays detailed information about the diagnosis at that specific point, providing more context for your decision-making. We’ve also added a quick-access button to DynaDetect for faster monitoring of other assets. 

These improvements were designed to make your monitoring experience more intuitive and efficient, contributing to a faster and clearer operation in your daily routine.   

Dynamox Lens 
 
Information at your fingertips 
The new “Learn More” button in the upper-right corner provides all the details about Dynamox Lens settings. Quickly and easily learn everything about installing and configuring Dynamox Lens. 

 
Thermographic scale adjustment 
The thermographic scale is now even better, offering more control in your thermal analyses. The temperature scale automatically follows the maximum and minimum values of the thermogram. With this update, you can manually adjust these limits using the cursor or set custom values, ensuring much more accurate and personalized analyses. 

Spot settings 
 
FTF Calculation by bearing race 
Now, you can choose whether the bearing’s rotating race is internal or external. Based on this setting, the system calculates the cage fault frequency, updating markers and metrics for even more accurate and reliable analyses. 

Spot Viewer 

Choose to enable or disable spectrum preview 
Responding to customer requests, you can now choose whether to display the spectrum preview on the Spot Viewer screen. In user settings, select Enable (to view) or Disable (to hide).  

Additionally, when configuring this preference, you can access the Spectral Viewer page by double-clicking on spectral metric collections. 

Axis unification 
With axis unification, you now have unified control, highlighting the selected axis in the following contexts: 
 

-Telemetry Charts: Clicking on the axis legend (Velocity / Acceleration) will make the charts respond to your selection, ensuring a unified visual experience. 

-Spectral Metrics: When selecting a spectral collection, the corresponding axis will be highlighted, while others will appear with reduced opacity. This approach makes it easier to identify the axis under analysis and will be applied consistently across other metrics. 

-Spectral Preview: When returning to the spectral preview, selecting an axis will make both charts respond to the selected point. The spectral collection updates to the chosen axis, keeping everything uniform. 

Asset Pro 

View previous orbits of the vibrating screen 
You can now visualize previously calculated orbits. This feature allows you to quickly select past readings and makes it easier to compare them with the current indicator. 

Trigger for DynaGateway 

New: Configure Trigger for DynaGateway via Dynamox Platform 
You can now configure Trigger for DynaGateway directly on the platform. Easily adjust conditional data collection according to your analysis needs. 
⚠️ Important: This configuration is only available for the LTE and IoT versions of DynaGateway! 

These improvements were designed to make your monitoring more intuitive and efficient, contributing to a faster and clearer operation in your daily routine. 

Do you have questions or want more details about any of these updates? 
Contact our team!  

See you soon! 
Dynamox Team 

The new update of the Dynamox App for Android is now available! 📱 

In this edition, we bring exciting news about Dynamox Lens, Dynamox’s thermographic device that continuously monitors the temperature of your assets. 🌡️✨ 

🆕 Dynamox Lens Configuration via App 

To validate the camera positioning and set parameters related to the infrared image of the Dynamox Lens, it was previously necessary to start the device’s configuration mode physically using the button. 

Now, with the new update, you can access this feature remotely through the Dynamox App! 🌐📱 

🔍 How can I use the new functionality? 

The user must log in to the app, go to the home screen, and open the main menu located at the bottom of the screen. 

In the menu, select the “Lens” option to start searching for nearby devices. Once the desired device is found, select it by clicking on its identifier. 

Next, the user will be directed to the configuration pages, where it’s possible to create regions, adjust object parameters, and view the thermogram, ensuring the correct positioning during device installation. ✅ 

🤔 Haven’t met Dynamox Lens yet? Learn more by clicking here. ⬅️ 

Update now and enjoy the new features available in the Dynamox App! 🌐 

For any questions, please contact Dynamox Technical Support: suporte@dynamox.net    

The new update of the Dynamox App for iOS is now available! 📱 

In this edition, we bring exciting news about Dynamox Lens, Dynamox’s thermographic device that continuously monitors the temperature of your assets. 🌡️✨ 

🆕 Dynamox Lens Configuration via App 

To validate the camera positioning and set parameters related to the infrared image of the Dynamox Lens, it was previously necessary to start the device’s configuration mode physically using the button. 

Now, with the new update, you can access this feature remotely through the Dynamox App! 🌐📱 

🔍 How can I use the new functionality? 

The user must log in to the app, go to the home screen, and open the main menu located at the bottom of the screen. 

In the menu, select the “Lens” option to start searching for nearby devices. Once the desired device is found, select it by clicking on its identifier. 

Next, the user will be directed to the configuration pages, where it’s possible to create regions, adjust object parameters, and view the thermogram, ensuring the correct positioning during device installation. ✅ 

🤔 Haven’t met Dynamox Lens yet? Learn more by clicking here. ⬅️ 

Update now and enjoy the new features available in the Dynamox App! 🌐 

For any questions, please contact Dynamox Technical Support: suporte@dynamox.net    

The October update of the Dynamox Web Platform is now available! 🌐✨ 

An edition full of new features made especially for you! This release brings exciting updates to Spot Viewer Analysis and Belt Conveyor Fault Detection!  

Notes During Analysis in Spot Viewer 

With this new update, users can now leave comments directly on the Spot Viewer spectral viewer, available while executing routes! 💬🔍 

In this version, the feature allows users to quickly add technical observations during analysis, encouraging information sharing between team members and ensuring continuity in technical work. 🔄 

🔍 How can I use the new feature?     

The analyst starts the analysis route and accesses Spot Viewer as usual. When viewing the spectrum through the preview, a comment section is now displayed directly in the interface: 

Additionally, comments are linked to the data collection and made available to other team members. This way, users can strategically use comments to ensure smoother analytical continuity! 💡 

Conveyor Belt Fault Detection – DynaDetect 

In this edition, we also bring an update to DynaDetect! The tool now performs fault detection in hydraulic couplings, expanding its analysis coverage for belt conveyors! 📈 

Through early fault detection powered by AI trained on multiple components, users gain even greater control over the health of their critical assets, preventing catastrophic failures and ensuring equipment reliability. 🚀 ️🌟 

Use the new features now, already available on the Dynamox Platform! 🚀 

For any questions, please contact Dynamox Technical Support: suporte@dynamox.net 

The September 2025 update of the Dynamox Platform is now available! 🌐

In this new version, we bring updates to DynaSens, Asset Tree, Public Alert APIs, Management Indicators, and DynaDetect.

🆕 New Monitoring Panel in DynaDetect

It’s now even faster to identify faults in your plant with the new monitoring panel in DynaDetect!

This version introduces a panel specifically designed for maintenance teams using the tool’s AI models to detect faults.

The tool provides a centralized panel with valuable information about your assets, connecting detection data with your team’s work and optimizing workflows.

The new panel enables your team to:

• Gain visibility into team activities
• Proactively identify faults and mitigate risks
• Get a systemic view of asset faults and affected components
• Identify undiagnosed faults more quickly
• Easily validate diagnostics
• View a list of identified faults

🆕 Checklist Templates in DynaSens

To simplify the DynaSens implementation process, this update introduces a list of predefined templates on the checklist creation screen.

These templates contain complete content that can be used directly or adapted to your company’s reality.

This feature ensures faster initial setup, routine standardization, and a smoother user adoption experience.

🔍 How to use the new feature?

Go to the “Checklists” tab in the side menu, click “Create,” and on the tool page, select the desired asset in the “Recommended Checklists” field and choose from the available templates:

By clicking the “play” button, you can preview the template content in detail before selecting it, ensuring it fits your needs.

After saving the selected template, the checklists will be directed to the “Manage” screen, where they can be reopened and edited as needed.

🆕 Management Indicators Update: Health Calculation Change, New Filters, and Indicator

Health Calculation Change

There will be an update to the current health calculation of indicators on the “Management Indicators” screen. Currently, indicators use spot alerts as the basis for calculation. Starting in 2026, the new calculation will use the worst alert from each machine to determine asset health.

IMPORTANT: The current calculation will be disabled in December 2025, but the new format will be available this year for users to adapt.

Class and Business Risk Filters

With the new health calculation enabled, you’ll be able to use the new class and business risk filters. The tool allows filtering information for machines with associated business risk or class.

Percentage Indicator of Machines in Alert Without Open or Ongoing Reports

A new indicator will also be available with this update. Users can now view the percentage of machines in alert without open or ongoing reports. This update aims to provide greater visibility into machines in alert that haven’t been analyzed.

🆕 Public Alert API

To wrap up this month’s updates, a new Alert API is also available!

With this new API, users can view the alert history related to a specific spot metric. The update is available at: API Dynamox – Alerts

Start using the new updates now, already available on the Dynamox Platform! 🚀

Any questions? Contact Dynamox Technical Support: suporte@dynamox.net

The Dynamox Platform August 2025 update is now available! 🌐 

In this new version, we bring updates related to the Side Navigation through the Asset Tree, Spectral Preview in Spot Viewer, and Tab Preferences in Spot Viewer. 

🆕 Side Navigation through the Asset Tree 

Aiming to make the visualization of the Dynamox Platform tools even more practical, the new update allows users to navigate through the asset tree in a side panel. 

🔍 How can I use this new feature? 

It is already available in beta version on the Asset Tree screen. To enable it, the user just needs to activate the side navigation mode. 

Once the new tool is enabled, it will be ready to use! By clicking on the asset tree icon in the platform, the tree will be available in side navigation mode, allowing navigation between machines and spots without interrupting the user’s analysis flow. 

Machines classified as Business Risk will be highlighted in the new view. By clicking on them, the Machine Viewer screen will open and the selected asset will be highlighted in the asset tree. 

The same occurs when clicking on a subset: the selected item will be filtered on the corresponding screen, highlighted in the Asset Tree, and displayed in the Machine Viewer page. 

When selecting a monitoring point, the Spot Viewer will open so the user can start analyzing the point. 

If you want to open one of the assets in a new tab, just hover over the desired point and click on the icon that will appear next to it. 

IMPORTANT: The current Asset Tree access page will not be discontinued, but the access path has been modified. Now it is necessary to click the manage button, located at the bottom of the side panel. 

In addition, to collapse the side panel just click on the icon in the upper right corner of the panel. It is also possible to search directly in the side panel: simply type the name of the desired item and the user will be directed to it. 

🆕 Spectral Preview in Spot Viewer 

This update also brings new tools to the Spot Viewer screen. 

Now, when opening Spot Viewer and selecting the spectral metrics tab, the user will have access to a side panel showing the spectrum of the most recent acquisition on the axial axis. By clicking on other points, the spectrum will update to the date of the selected acquisition. 

In addition, in the side panel it is possible to select the preferred axis and, by selecting the desired spectrum in the chart, the panel will update with the corresponding information. 

However, this view does not include the analysis tools available in the Spectral Viewer. For a more detailed analysis, the user can access Spectral Viewer by clicking on the bottom right corner. 

If there is no acquisition in the selected period, a warning will appear in the side panel suggesting refining the acquisition period to view the spectra. 

🆕 Tab Preferences in Spot Viewer 

To close the August updates, we present one more feature in the Spectral Viewer page. 

Now users can select which tab they want to open by default, making their analysis journey easier. By hovering over the tabs, a pin icon will be available to set preferences among the telemetry, spectral metrics, and report tabs. The choice is up to the user! 

🆕 Listen to Shaft Vibrations in Waveform 

To wrap up the August updates, you can now listen to the sound playback of vibration data from each shaft in a waveform! 

This new feature can provide additional information and valuable insights into a machine’s behavior. That’s because many types of failures can produce distinct acoustic signatures, allowing you to identify issues more intuitively. 

With this improvement, we aim to help our users achieve greater operational efficiency, making condition-based maintenance more effective and reducing downtime! 

Start using the new updates now, already available in the Dynamox Platform! 🚀 

If you have any questions, please contact Dynamox Technical Support: suporte@dynamox.net 

The new update of the Dynamox Platform is now available! 🌐 

We bring new features related to Spot/Checklist Selection in Reports and Changes in Viewing Preferences! ✨

🆕 Reevaluate Checklists 

Aiming to improve the usability of the Dynamox Platform, users can now quickly update the status of anomalies identified during sensory inspections. ✅ 

All of this is possible through the new checklist reevaluation feature, enhancing efficient planning for the entire team! 

🔍 How can I use the new feature? 

The user must log in to the Dynamox Platform and access the “Checklist Reports” page through the side menu. From there, the user should select the checklist(s) they wish to reassess. 

To perform the reassessment, the following criteria must be met: 

• Only checklists with at least one alert can be reassessed; 

• A maximum of ten checklists can be reassessed at once; 

• The user must have permission as a Mechanical Inspector, Electrical Inspector, or Lubricator to perform this action. 

After selecting the checklist(s), the user must click on “Reevaluate” and choose between the two available options: 

• Reevaluate via the platform, where the user answers the checklists again through the Web Platform; 

• Create a corrective route, where the user generates a new route to be executed using the App. 

Reevaluate via the Platform 🖥️ 

Using this option, the user can update the criticality level of the necessary questions and attach evidence justifying the reevaluation of the item — for example, an image showing a component obstruction. 

Create Corrective Route 🔧 

When selecting this option, the user must define the execution interval of the route, while the content (checklists and assets) will be filled in automatically. The route will be automatically assigned to the user performing the reevaluation. 

Additionally, the new update now also includes a Status Timeline, which shows the number of alerts issued by the same checklist during the selected period. 

🆕 Spot/Checklist Selection in Reports 

Historically, when creating predictive analysis reports by machines, subsets, or components, users were not able to select the analyzed spot for diagnosis. 

Now, the new update allows the selection of one or more spots in reports by equipment! 📝 

Depending on the report’s origin, the spot may come pre-selected or a list of spots may be available for selection. It’s important to note that the location step remains unchanged! 

In the information step, a “Spots” field has been added, where you can select the spot(s) whose analysis contributed to reaching that diagnosis. The report’s location is also available in the upper corner. 

If the machine level was selected in the location tab, all associated spots below will be displayed in the list of available spots for selection — including those linked to subsets/components at lower levels. 

Additionally, in sensitivity analysis reports, it will be possible to associate checklist responses. 

🆕 Change in Viewing Preferences 

Still in this update, we bring an improvement to the viewing preferences of the Spot Viewer. 

Now, users can permanently add and customize the charts they want to view, further optimizing their experience! 

🔍 How can I use the new feature? 

The “add chart” button now adds the chart to the view in a persistent way. In other words, once selected, the chart remains in the Spot Viewer across all future user sessions. 

Additionally, to permanently remove charts, a button has been added to the user’s chart view. After deletion, an option to undo the action will be displayed. 

Start using the new updates now – already available on the Dynamox Platform! 🚀 

If you have any questions, please contact Dynamox Technical Support: suporte@dynamox.net 

The new update is now available on iOS!  🌐 

Check out our new features and tools, made especially for you. ✨ 

🆕Dashboard and Menu Redesign 

The new app update brings a complete redesign of the dashboard screen! 

The screen has been fully revamped, with functional visuals aligned with user needs: 

Additionally, if the user does not have the DynaSens module, the new dashboard will display an informative screen that redirects to the website: 

New Menu and Access   📲 

With the new update, the old menu has been removed and placed at the bottom of the app, providing quick and easy access to the main screens and features. It also improves visibility and available actions for users: 

We also have a new account access screen! Now users can add information such as name, position, and email: 

The buttons for creating a machine and accessing team routes have also been updated. 

On the user’s first access after the update, we’ll show the new features and changes in a simple way. 

🆕Checklist Response Report 

To bring even more possibilities to our app, it’s now possible for the executor to generate a report directly from the app after identifying an alert during an inspection routine! 

💡 How to use the new tool? 

The executor should go to the Sensitiva area in the app, select the route they want to execute, and access a checklist. 

After completing the checklist, the user will receive a “Checklist Completed” notice and the option to Create Report. If the user selects this option, they will be directed to the Report screen. 

The Report will come with the fields Asset, Checklist, Status, and Attachments pre-filled. After completing the remaining information and saving, the user will return to the step of the route they were on. 

🔔 Important: Only the Asset and Checklist fields will not be editable. 

If the user uses the “Checklists Only” function, the Create Report option will appear between one checklist and another. 

The executor also has the option to create reports after completing the route(s), by accessing them in view mode. 

Start using the update now: already available on the iOS app! 🚀