Category: What’s New?

Always seeking to update its analysis tools and facilitate the use of the Web Platform, Dynamox has just released another series of new features. 

Check out the main updates in the latest version below: 

INTEGRATED MODULE  

DynaNeo 

PREDICTIVE MODULE  

Forecast

New spectral metrics screen  

SENSITIVE MODULE  

Checklists

Dynaneo

Customize your company’s asset management process and have a more interactive analysis  

DynaNeo is a visual management dashboard, which combines information from the DynaPredict environment into an integrated visualization. The functionality allows the calculation of the reliability of a process based on the indicators of interest to the user. The DynaNeo is customizable, interactive, visual, and conclusive.  

With DynaNeo, you can easily explain the maintenance process through visual management. With this solution, you can quickly find the alarmed assets and visualize the consequences of breakage or maintenance. In addition, it is possible to configure the relevant indicators for the application and set the desired reliability percentage.  

Forecast

Project future spectral and telemetry alarms to schedule maintenance actions.  

Spot Viewer and DMA now feature the Prediction tool, which will help you analyze your data more efficiently. 

This tool allows you to project telemetry data and spectral metrics based on a recent history, allowing you to identify monitoring points that are evolving and schedule maintenance actions.  

 

Spectral Metrics

Ensure a more complete analysis of the information.  

The Spectral Trend screen has been renamed; it is now called Spectral Metrics. The data on the screen is still the same, it has just changed its access location and has improved data visualization.   

The page is now integrated as a new tab in the Spot Viewer, offering the same telemetry-compatible features and tools. 

It also allows visual customization of the graphs. This upgrade makes it easier to view the spectral data and provides a more complete analysis of the information, with all three tabs available in one place. 

Checklists 

Interface change for better usability  

The checklists have been updated with a more visual interface, resulting in better usability. Checklist creation is centralized, bringing together the name and type screens with question settings on one screen. 

Before creating a checklist, it is possible to get detailed information about the options available for each checklist type. The user can review the configuration steps and see how the checklist will look in the application. 

The old Standard Checklist is now called Free Checklist, keeping all the previous functionalities. The user can create a checklist, assign a name, and configure the questions. 

During the setup process, there is a new playback option. The play button is available in all stages, allowing the user to test the checklist execution and preview what it will look like before saving. 

When adding a Free Checklist, the user can select whether the question will be single choice, multiple choice, or manual measurement. In addition, you can change the order of the question alternatives by clicking and dragging to the desired position (Drag&Drop). 

 

 

In order to keep it’s analysis tools updated and improve the usability of the Web Platform, Dynamox has just released some new features. Check out the main features of the newest version below: 

PREDICTIVE MODULE

DynaDetect – Automated Failure Detection Tool
New Spot Center

 

PREDICTIVE MODULE

DynaDetect – Automated Failure Detection Tool

DynaDetect is the new DynaPredict Solution’s automated diagnosis tool for asset failure, based on measurements generated by DynaLoggers. It is focused on those who need agility and reliability in the asset management routine. With its use you can view automated diagnoses that highlight machines with possible indications of failure, and identify the severity of these failures. The objective of these automated diagnoses is to assist the technician and increase the assertiveness of the analysis, as well as to support the manager in asset maintenance planning and decision making.

DynaDetect uses user-entered information such as asset type, machine characteristics, and monitoring location along with data from remote sensing to generate automated diagnoses. With the proper configuration, it is possible to detect mechanical, electrical, and hydraulic failures such as: unbalance; stiffness loss; misalignment; structural looseness; bearing wear; gearing defect; rotor bar defect; stator defect; hydrodynamic defect; aerodynamic defect, and cavitation.


Want to know more? Contact us.
 

New Spot Center

The Spot center, the screen where all the settings for the monitoring points are defined, underwent a major adjustment aiming at better usability when creating or editing the Spots.


The parameters that you already know were redistributed in new tabs, so that their identification is easier.

In addition, the section for setting the Operation Levels now has an illustrative chart, in order to clarify its concepts and help the user define the most appropriate values.

Dynamox has just released a series of new upgrades to the Android version of the DynaPredict App. Check out the key features of version 4.19.5 below. 

SENSITIVE MODULE

• Sensitivive Analysis Report 
• Added “Back to Top” Button on the “Rolls” Checklist Type 

SENSITIVE MODULE

SENSITIVE ANALYSIS REPORT  

With the new Sensitivity Analysis Report tool it is possible to register anomalies in assets and sub-areas without the need to be linked to scheduled and routine inspections.  This way of recording irregularities outside a predetermined route has its advantages, such as: 

• The inspector sees a problem in assets that are not in the route in that moment can report the abnormality via the new function. 
• In case an authorized employee notices something unusual in an asset that is not inspected at any route, it is possible to notify the occurred. 
• If an already performed/closed route does not have consistent content, you can add information 

 To iniciate the procedure, by the latereal menu, click on “Sensitivity Analysis Report” and then in the symbol “+” to begin the registration. 

On the following screen, it will be necessary to fill in some fields to feed the report with relevant information to the occurrence registration. The main topics are detailed below: 

• Asset: click on “Associate Asset” and choose in the asset tree the machine, subset or the component in question. 
• Detected Failure: click “Add” and select which failure is detected. You can select more than one answer, as many as identified. 
• Criticality level: choose the appropriate criticality 
• Diagnosis: describe in detail what was found. 
• Recommended Action: describe the action that is recommended to correct the failure. For example, if the detected failure was Material Accumulation, the recommended action could be “Promote cleaning”. 
• Attachments: you can write an observation, record an audio, and take a picture, to make the report more complete. 

ADDED “BACK TO TOP” BUTTON IN THE “ROLLS” CHECKLIST TYPE

To guarantee a better navigation to the user, a “back to top” button has been included in the “Rolls” checklist, so that it is possible to return to the top of the screen when entering information, making it easier to enter information for the next roll.